|
|
 |
| Firstly, look at the type of surface. Is it wood, metal or concrete? Different surfaces need different treatments. For specialised surfaces such as metal or concrete, you may have to buy paint designed specifically for those types of surfaces in mind. In most cases however, it's probably for your walls or doors, in which case, most paints will suffice.
Secondly, decide on the type of finish. Gloss? Matt? Silky sheen? Textured?
Choosing the right finish can subtly enhance your living space.
Finally, choose your favourite colour.
(Just remember the general guidelines:light colour will create a feeling of space, whilst dark colour help give a cosy atmosphere to the room (but can make a room look cramped if it's small.) |
| back to top |
 |
 |
| To estimate the amount of paint required, follow the guidelines below:
1. Divide the room into units of the same colour or same type of paint.
2. Multiply the height and width of each unit. Add these unit totals together (A1).
3. To calculate the ceiling area, multiply the width and length of the floor (A2).
4. Find out the paint coverage (C), either by reading the information on the can or consulting the paint manufacturer.
Calculate the formula:
|
| back to top |
|
 |
|
* Sandpaper |
* Paint kettle |
|
| * Scrapers & filling knife |
* Roller trays |
| * Sponge |
* varnishing brush |
| * Masking tape |
* Radiator roller |
| back to top |
|
 |
| Proper surface preparation is essential to save you time and effort in re-doing work later.
Important: all surfaces should be clean, dry and grease free.
* Wash the area to be painted with water and liquid detergent.
* For heavy stains, use turpentine, then wash and rinse thoroughly.
* For fungus or mould, apply a fungicidal wash or a strong bleach.
* Peeling paint and rust should be removed and sanded smooth. |
| back to top |
|
 |
To find out more about NIPPON PAINT, please click HERE
|
|
